Modified Drum Kiln

Modified Drum Kiln

 

1. Use an ordinary drum with 91 cm tall and 57 cm in diameter (55 gal).

2. Make a hole on top of the center about 10 cm wide (where the chimney can be placed).

3. Make equal holes on four sides about 1.5 cm in size and 30 cm spaced apart from each center, but the lowest is 2 to 3 cm from the bottom. (For example the second top is 30 cm apart from here then the third is the same).

 

Operation:

1. Place a piece of roundwood, about 4 inches in diameter at the center of the kiln.

2. Stack coconut shells around this makeshift chimney until the drum is full.

3. Remove the starting chimney and drop a piece of burning rag to the bottom of the drum until it ignited.

4. Cover the drum when the fire is well underway.

5. Gradually decrease the air opening.

6. Feed additional shells after sometime, when the volume of the charge shell have shrunk.

7. Carbonization is considered complete when the volume of the smoke thins out and becomes bluish.

8. When this happened all the holes are closed and the kiln is left to cool.

 

This procedure last 5 hours to finish charcoal making. The charcoal yield with this kiln design ranges from 27-30 per cent.

 

Tips for Good Quality Charcoal

 

1. Shiny and black in color, not reddish or greyish.

2. It sounds like metal when it falls on the floor. A good charcoal easily breaks but uncooked

charcoal is hard and doesn’t break easily.

 

Source: Tekno Tulong

Modified Method of Charcoal Production

Modified Method of Charcoal Production

 

The highest form of charcoal comes from wood or coconut shell burned under controlled air.

About 75% of energy we use comes from wood and charcoal fuel.

The customary or usual method of charcoal making was to answer the needs of barrio people

and to lessen the problem of forest denudation.

There are many types of charcoal making, the easiest is the use of excavation or pit and use

of drum. The principle of charcoal making is by heating the wood or coconut shell until dried

leaving only the carbon. This can be done by burning slowly under controlled air. If it is not

done this way the charcoal will turn into ashes.

The best method is by burning in a low fire and the smoke circulates within the wood and

coconut shell that are being made into charcoal.

 

Continue reading “Modified Method of Charcoal Production”

How to Produce Kawayan Charcoal Briquettes?

How to Produce Kawayan Charcoal Briquettes?

To fully utilize the bamboo, another technology was generated that could help the standowners produce more income. Wastes from bamboo processing may be manufactured into charcoal briquettes. This could help reduce pressure on wood resource. It could also help mitigate carbon dioxide emission into the atmosphere.

The steps in marketing kawayan charcoal briquettes are:

  1. Collecting and Preparing the Raw Materials Continue reading “How to Produce Kawayan Charcoal Briquettes?”