Dye from Bangkoro

Dye from Bangkoro

 

(Red, Light Violet and Chocolate)

 

The substance where the dye from bangkoro is taken comes from the bark of its roots –

abundant in its third to fourth year of age. No more dyes could be taken when the aged

beyond four years.

 

The thin roots are the ones useful. When it grows to about half inch, it becomes useless.

The root bark is the source of red dye, the woody part – yellow dye, so that when the root bark

gets woody, the dye is reddish yellow.

 

Mordants:

red and rose — aluminum

chocolate brown — chromium (acc. to strength of mordant)

light violet to black – iron

 

source:tekno tulong

Red Dye from Sibukaw


Red Dye from Sibukaw

 

Extracting dye for a 400 grams cloth:

 

1. Soak ground or wood shavings in water at a ratio of 1 kilo wood shavings for every 40 liters of water and boil for five hours.

2. Strain, then boil again until it thickens and dries.

3. Scrape the dried residue and pulverize about 120 grams

 

Mordanting

1. Heat the cloth to be dyed with 3% mordants: 12 g potassium dichromate or oxalic acid in 12 liters water at 60° C for half an hour.

2. Let to cool and wrap.

 

Dyeing

1. Boil the cloth in 30% dye mixture (1 part dye in 30 parts water). 120 g sibukaw powder dye mixed to 12 liters water 4 g sodium carbonate (1%), and 20 g sodium bisulfate (5%)

2. Stir constantly to get an even colored cloth.

3. Let it cool, squeeze, then wash well. (Use 20% teepol; 20 g teepol in 100 cc water)

4. Rinse well and dry.

 

Philippine Textile

Research Institute

(E. Fernandez, 1995)

Tekno Tulong

 

Dyes from Philippine Plants

Dyes from Philippine Plants

Dyeing using different plants has been a traditional practice. However, with the invention of
artificial dyes and modern dyeing practices, such use of dyes from plants was soon
abandoned.
There are many Philippine plants which are good source of dyes — either bark or wood.
There are plants which are naturally rich in tannic acid or tannin which is used in dyeing
leather, wood or textile, such as: kamachili, bakauan, red white lauan, tangal, ipil-ipil, coconut
husk and others. The common procedure of extracting dyes is as follows:
1. Boil the ground or chopped bark in uncovered cooking pot with just enough water to cover
the barks.
2. Boil to 60° C-80° C with with continuous stirring.
3. After an hour, strain in wire screen and replace water in the cooking pot.
Repeat 1-3 until water becomes pale in color.
4. The water used in second or third boiling could be used for the next fresh barks.
5. Mix all the water used for boiling and boil them altogether until you get a dark colored dye.

Source:Selected R&D Projects (Completed) NSDB
Tukno Tulong